CloudyWeather in Bristol (GB): Overcast Clouds

'TT' Partition - Woven Floor

'TT' Partition - Woven Floor

Price£POA€POAPrice on application

Enquire

Larger baskets have internal partitions woven into the walls and floor. The partitions provide greater structural integrity and separation between groups of passengers. The pilot and fuel cylinders occupy a separate compartment from the passengers. There are many woven floor options available from the Cameron Balloons range. 

Cameron Balloons are the only major European manufacturer to offer baskets with a woven floor option on baskets up to 3.6m long. Woven floors are lighter and our weave patterns can be adjusted to add strength or reduce weight, if required.

At a glance

Baskets are traditional wickerwork construction, using a mixture of Willow and Cane. The Cameron Balloons 'TT' Partition baskets have a woven floor with Kiln dried Ash or Synthetic (optional) runners bolted to the floor. The structural load is taken by twin, 6mm stainless steel wires running through a 32mm dia. stainless steel top frame and to the walls forming a continuous sling from the burner frame through the basket floor.

Longevity and strength are very important to consider when looking for the perfect hot-air balloon basket.

We pride ourselves with the fact that many of our baskets are still airworthy today, after so many decades flying professionally or for pleasure.

The top of the basket is padded and trimmed with the highest quality leather or suede. The bottom edge is traditionally covered with rawhide which protects the basket from damage during landing and transportation. For those in very harsh environments, we offer a leather base at a supplementry price.

Recent additions to the options available have included:
• Towing Systems,
• Pilot Pulpit Rails,
• Pilot Compartment Cross-Bracing,
• Pilot Box (Step),
• Pilot and Passenger Restraints,
• Sidewall Runners,
• Sidewall Protection,
• Passenger Positioning Blocks,
• Basket Strong Point for launch restraint,
• Leather handles,
• Extra step holes and embroidered trim. 

Cameron Balloons Ltd also offer a number of special purpose baskets. For further information please contact our Sales Department or your nearest Cameron Dealer.

All models

Choose from the following models to suit your balloon:

  210TT - CB3084 250TT - CB3004 300TT - CB3042
Occupants 8* + 1 inc. Pilot 12* + 1 Inc. Pilot 16* + 1 Inc. Pilot
External
Dimensions
(cm)

155 x 264


 155 x 314

 
155 x 360

Height (cm) (Approx)
138
138
138
Support Poles
4
4
8
Compartments
5
5
5
Pax
Compartment
Dims (cm)

92 x 77


117 x 77


140 x 77

Pilot
Compartment
Dims (cm)

155 x 80


155 x 80


155 x 80

Approx. KG 240 - 250kg 280 - 300kg 350 - 360kg
Cushion Floor Optional Optional Optional
Sidewall Cushions Optional Optional Optional
Format Double 'T' Partition Double 'T' Partition Double 'T' Partition
Pulpit Rail Optional Optional Optional
Sidewall Runners Optional Optional Optional
Step holes 2 per Passenger Compartment.
4 per Pilot Compartment
Extra Step holes =
Optional
2 per Passenger Compartment.
4 per Pilot Compartment
Extra Step holes =
Optional
2 per Passenger Compartment.
4 per Pilot Compartment
Extra Step holes =
Optional
External Handles 14 in total -
3 on each short side
4 on each long side
16 in total -
3 on each short side
5 on each long side
20 in total -
3 on each short side
7 on each long side
Internal Handles 38 in total -
9 in each Passenger Compartment
2 in the Pilot Compartment
54 in total -
13 in each Passenger Compartment
2 in the Pilot Compartment
54 in total -
13 in each Passenger Compartment
2 in the Pilot Compartment
Leather Handles Optional Optional Optional
Leatherbase Optional Optional Optional

These woven floor, double 'TT' partition basket sizes are approximately wall centre to wall centre. Please note that an additional allowance must be made for external wall thickness and handles when determining the size of any trailer or vehicle that will carry the basket.

* Occupancy data based on EASA requirements for baskets with or without passenger squabs.

Basket options

Basket colours

Please see our leather colour charts for:

  • To help select your hopper base unit trimming colours: Suede and Leather Colour Wheel
  • The selector for cordura fabric used for cushions and cylinder covers: Cordura Colour Wheel
  • Other leathers are available upon request. This can be the perfect solution to colour-match a desired pantone or corporate shade. Special leathers are ordered to your specification and therefore can sometimes incur an additional supplier production lead time or surcharge.

What people are saying…

Customer promise

Our reputation for hardware excellence is world-renowned. In fact, we offer the widest range of baskets, with over 200 elegant designs. Constructed primarily from willow and cane, these materials are still used today because they have proved to be extremely resilient, lightweight and easy to maintain, as well as adding to the romantic feel of ballooning.

Whatever your needs, we will have the perfect size and configuration of bottom end to make your every flight a comfortable and enjoyable experience. The criteria for selecting your new basket could not be simpler! Baskets are matched to the size of the hot-air balloon envelope. This is determined by the number of passengers you wish to carry, local conditions, including terrain and ambient temperatures. Please see our current Flight Manual in the Support Section for further details or email your request to sales@cameronballoons.co.uk - we will be glad to help.

Articles featuring 'TT' Partition - Woven Floor

Find a dealer

Find your nearest Cameron Dealer

Dealer network

Get help buying

Have a question? Call a specialist.

Contact us

Ready to fly

Don’t want to wait, we can help

Find out more

Support

Download maintenance manual

Learn more